|
|
Item Posts
Sort Order
|
|
|
Just bought a 1994 Ford Bronco.. manual hub question.
|
jstickley
New User
| Posts: 1
| Joined: 11/09
Posted: 11/01/09
06:51 PM
|
|
This may seem like a very elementary question for most, but i am totally confused.
The previous owner installed Warn Manual locking hubs in place of the automatic hubs that came standard on this truck. When I lock the hubs, it doesnt seem like it is going into four wheel drive, and the push buttons on the dash do not light up.
I am not really savvy on 4x4 systems and I hope that I can find the answer here.
Thanks in advance.
Jesse
|
|
|
|
sfr4x4
New User
| Posts: 27
| Joined: 02/09
Posted: 11/02/09
11:43 PM
|
|
More likely it's a problem with the electronic push-button 4WD system, as there is no link between the front hubs and the 4WD indicator lights.
A way to check is to leave the front hubs UNlocked, but try to shift the transfercase into 4WD. If the front driveshaft cannot be turned by hand, the t-case most likely is locked in 4WD. If the shaft does turn, then the t-case is not engaging. The shifter motor on the rear of the t-case is the most likely culprit.
|
|
|
|
|
|
|
|
|