Ok i have a 95 nissan hardbody i have just installed a 3 inch body lift and i run 33's on it. After installing the body lift I raised my torsion bars to level the truck. Now i want to add an 3 inch suspension lift. Do all nissan hardbody lifts require blocks in the back and lifting the torsion bars upfront. If so my torsion bars are lifted all the way up in the front. Are there any other ways to lift he frontend of my truck after putting 3 inch blocks in the back. I have seen a double shock kit 4 my truck on the inter net which uses 2 shocks per side up front and it says it is a front 3 inch suspension lift. Is this true? Will shocks raise ur truck?

You can use UCA, Upper control arms and/or a drop down kit from Trail master.

The Triple Shock kit from AC is part of a UCA lift. I had one on my 85 KC.

Check out 4x4parts.com for more info on availble lifts for your D21.

Barry

NissanNut

ok
i have a 1991 hardbody and i want to put a straight axle under it but dont want to buy a conversion kit

is there a cheap way i can do this ?

and what would be the best gear to run if i am running 31x12.50 boggers?