|
Num Posts
Sort Order
|
seenred
New User
| Posts: 2
| Joined: 09/08
Posted: 09/06/08
02:25 PM
|
|
i have been looking for a way to hook a chevy 465 tranny to a ford transfer case need it for a ford pulling truck
|
SnoMan
Addict
| Posts: 5154
| Joined: 05/04
Posted: 09/06/08
03:08 PM
|
|
You could try advanced adapters but it would be a lot easier if you used a NP435 from a Ford.
|
seenred
New User
| Posts: 2
| Joined: 09/08
Posted: 09/07/08
08:36 AM
|
|
i can't get a three speed kit for the ford 435 tranny
|
|
|
SnoMan
Addict
| Posts: 5154
| Joined: 05/04
Posted: 09/07/08
09:12 AM
|
|
![]() seenred:
i can't get a three speed kit for the ford 435 tranny
I am assuming 3 speed Tcase. Perhaps you are going about this all wrong. Rather than trying to gear down Tcase because axles are lacking for tires size consider re-gearing axles and install a NV4500. A early GM 4500 (92 to 94) has 8.44 to 1 ratio spread from highest to lowest range which when couple with deeper axles would give you more range selections and a more compact package too. Also all GM 4500's have 32 spline outputs.
|
|
Posted: 09/08/08
04:01 PM
|
|
I'm going to agree with Sno on this one, your best bet may to be to look for other places to deepen your gears. Or just go all out and get an Atlas.
Long Travel 4 Wheel Drive - The Best of Both Worlds!
Questions? Comments? Concerns? PM Me!
|