|
|
Item Posts
Sort Order
|
|
|
1989 chevy tired 305/700r4?
|
|
Posted: 08/30/08
10:19 PM
|
|
Hey guys whats going on I need some help I got a 89 chevy truck 2500 with a 305 . I want to swap a 350 in it. the engine will probably be reman 350. from somewhere Dont know just where though. I need to replace my 700r4 tranny too. So I need to know what parts to get. I have done some research , Can anyone tell me what I need I live out here in California so I need to pass smog. Any help I would appreciate
List I prob need let me know if Im wrong or right
350 injectors. 350 esc module, 350 knock sensor. and maybe a tune? Im new to this so please help me.
ET
|
|
|
|
SnoMan
Addict
| Posts: 5783
| Joined: 05/04
Posted: 08/31/08
05:19 AM
|
|
You will need a 350 Eprom for ECM or a 350 ECM and 350 injectors. The ESC and knock sensor is the same.
|
|
|
|
|
Posted: 08/31/08
10:15 AM
|
|
So the accessories are good? what about the intake?
|
|
|
|
|
|
SnoMan
Addict
| Posts: 5783
| Joined: 05/04
Posted: 08/31/08
11:20 AM
|
|
 cheyenne89:
So the accessories are good? what about the intake?
Everything should bolt right up and intake is same. The only difference between ECMs is the Eprom in them. You can change that or whole ECM. I do assume you are planning on using a 350 of same era/age. You want a 87 to 95 TBI350 not a pre TBI motor because that will not likely pass emission due to internal differences in compression, ports and cam timing. One concern though since this is California will emission requirements stay with body year or engine size/year when you swap this?
|
|
|
|
|
Posted: 08/31/08
11:24 AM
|
|
Same year or newer, I went down and talked to this refereee and dhe said I could do it as long as I had everything working correctly, My truck has 200k= miles on it so does the tranny so Im looking in the market for both thanks for replies
|
|
|
|
|
|
|