NEW REDUCED PRICE!!!
WANT TO BUILD A PRE-RUNNER, this is a great start!

1987 Toyota pickup 4x4 (208k on body and Chassis, clean title), 4.3L conversion (140k with top end rebuild and rear main-seal at 130K), this conversion is almost finished. I ran out of time and the wife thinks I have too many toys so I have to get rid of it.

SPECS
-Straight body, damaged drivers window frame, but still works
-2” body lift
-Smitty built bumpers
-31” tires and stock steel wheels
-Stock suspension
-A lot of random Toyota parts
-3.4L v-6 Chevy Vortec, computer, wiring harness and many of the associated brackets and parts, really strong and tested before pulled from ’93 S-10
-3 core Toyota V-6 Radiator, w/modified hose bibs for 4.3l, bolts right in
-power steering box, needs pump

PARTS FROM ADVANCE ADAPTERS, INC, (over $2k of parts been never run)
-Bell housing adapter Kit
-Slick fit Chrome headers
-Chevy 4.3 to toy PU engine mount adapters, new mounts
-Toyota IFS modified 4.3 oil pan
-153T GM flywheel
-Center Force Clutch assembly
-GM release bearing
-Land Cruiser Slave Cyl.
-Power Master Hi Torque Starter

NEEDS to be done
-Custom Exhaust
-P/S pump and bracket
-Accessory’s and belts
-some hours of work
-if you do the work yourself it should cost less than a $1000 to finish

You Cannot Smog this vehicle in CA, Green sticker ONLY, best if sold out of state

$1500 I am NOT willing to negotiate. I have seen completed similar build ups sell for up to $8000.


I can send pictures and a complete list of what I have into it. Send your email address to paul@bioniconus.com or PM me and give me a few days to get the info to you.  

I have dropped the price from $2500 OBO to $1500 Firm  

I will post some pics and a complete parts list next week.  

WANT TO BUILD A PRE-RUNNER, this is a great start!

1987 Toyota pickup 4x4 (208k on body and Chassis, clean title), 4.3L conversion (140k with top end rebuild and rear main-seal at 130K), this conversion is almost finished. I ran out of time and the wife thinks I have too many toys so I have to get rid of it.

SPECS
-Straight body, damaged drivers window frame, but still works
-2” body lift
-Smitty built bumpers
-31” tires and stock steel wheels
-Stock suspension
-A lot of random Toyota parts
-3.4L v-6 Chevy Vortec, computer, wiring harness and many of the associated brackets and parts, really strong and tested before pulled from ’93 S-10
-3 core Toyota V-6 Radiator, w/modified hose bibs for 4.3l, bolts right in
-power steering box, needs pump

PARTS FROM ADVANCE ADAPTERS, INC, (over $2k of parts been never run)
-Bell housing adapter Kit
-Slick fit Chrome headers
-Chevy 4.3 to toy PU engine mount adapters, new mounts
-Toyota IFS modified 4.3 oil pan
-153T GM flywheel
-Center Force Clutch assembly
-GM release bearing
-Land Cruiser Slave Cyl.
-Power Master Hi Torque Starter

NEEDS to be done
-Custom Exhaust
-P/S pump and bracket
-Accessory’s and belts
-some hours of work
-if you do the work yourself it should cost less than a $1000 to finish

You Cannot Smog this vehicle in CA, Green sticker ONLY, best if sold out of state
$2000 OBO  

I can't figure out how to post pics on this forum, PM me and I will send them to you  

Hey, can you send me some pictures? my email is wy.outlaw@hotmail.com   I'll email you too  

hi my name is Tyler Davis. i was wondering if u could send me some pictures of the truck and a list of wat u got in it. also is it a automatic or standard tranny.
My email is tyler_davis_14@msn.com                                                                                                                                                                                       thank you