i finally got my dana 60 front rearend and i got it for $200!!! my problem is that it's a drw so i gotta swap the hubs to srw. the guy i bought it from says that i also have to change my stub shafts (outter shafts) over to srw shafts. i thought they were the same, can anyone shine some light on this for me? thanx!!!  

first off chopper what is drw and srw?  

DRW means its a dualie which has a different hubs and SRW means it is a regular non-dualie P/U.  

yes drw= dual rear wheel and srw= single rear wheel. but are the stub shafts the same on both axles?  

They "should" be. Only real difference is the hub. GM is not going to stock a lot of different parts building them.  

i have friend who has a 60 and 14 bolt off a dualie but bought  a kit to change it over to srw.  

The stub shafts are the same.You will need the srw hub and rotor.They run about 400$ a set.  

2oldchevys:
The stub shafts are the same.You will need the srw hub and rotor.They run about 400$ a set.

Maybe at a dealer but you can surely do a lot better than that new or used if you look around.  

This price was for a brand new set of gm production hub/rotors.from boyce.I'm sure they can be had a little cheaper.if you guys know of a cheaper set let me know.as i am also converting a drw dana 60 right now.  

thanx guys!! i'm glad to hear the stubs are the same. i found new ones on evilbay for $320 but not too many used out there that i've found. i'll keep looking and let you know if i find a deal.  

320.00$ sounds better than 400.00$. i'll have to check into that.
My d-60 came out of a 1978 4x4 dualie,camper special.it had a 350cid motor,th400hd trans.203 trans case.
HERE'S A ?,SOMEONE PUT LOCKINFG HUBS ON THE 60 BECAUSE OF THE FULL TIME TRANS CASE.THEY ARE B&M hub locks,will these be able to convert over to the new hubs?  

i'm pretty sure they will fit either hub but i would get another opinion. yeah the srw hubs are going for $320 which is less then $400 but thats still alot for me. i'm cheap!!  

I am getting a dana 60 and need the dually hubs. I would be willing to swap for singles for shipping. Let me know HndrsonJ@aol.com in GA.  

The lock out hubs for a D60 chev are 30 spline, unless the stubs have been swapped for 35 spline. Check the spline count when you find your hubs.