its a 97 yukon i bought at auction with bad tranny, it has a 4-6" kit from skyjacker with drop torsion bar setup and 5" blocks...the truck had 265/16s on it when i got it im sure someone pulled thier tires off and put some B/S on there, but anyway i got some 35/12.5/15 on 15x10 wheels...they dont rub just parked there but turn the wheel and they have about 1" clearance between lower front fender and corner of front bumper ( no air damn ) the truck is perfectly level ride height front/back and i cant jack up the torsion bars anymore because i have run out of camber adjustment anymore pressure on torion bars will result in negative camber issues (tires in at top and out at bottom) everyoe says they should fit but its just not gonna go...just ordered a 3 body lift to fix the problem but i have seen some 6"sus and 3" body lifts on the web using 38" and theres just no way that could happen here...sould i need that much lift to clear 35s??

help please  

A 6 inc lift on your yukon shuold clear 35s just fine, i am gussing you probabley have only a 4 inch lift that barely clears 33s, other wise a 6 inc suspenion and 3 inc body lift is just overkill for only 35s and you shouldn't have to have cranked up the torsion bars if its a 6 inc lift to clear 35s