|
Num Posts
Sort Order
|
Kstrader
New User
| Posts: 8
| Joined: 06/07
Posted: 07/12/07
07:45 AM
|
|
I reacently purchased a 1990 dodge power ram w150
i just replaced the front brake lines and took it out for a drive to see how they worked.(they worked great) but i noticed my speedometer wasnt moveing. my first thought was to take off my under dash but then i thought to look under the truck at the tranny to find the wire for it. i dont really know where to start with this. and i would appericate any help i can get.
|
|
Posted: 07/12/07
11:48 AM
|
|
1990 should be mechanical correct? I would start looking for a cable coming out of the transfercase or transmission. Why it would stop working after just replacing brake lines is the weird part.
Long Travel 4 Wheel Drive - The Best of Both Worlds!
Questions? Comments? Concerns? PM Me!
|
SnoMan
Addict
| Posts: 5232
| Joined: 05/04
Posted: 07/12/07
02:16 PM
|
|
As far as I know it is cable driven too and it will be hooked up to transfer case output shaft on a 4x4 not tranny because otherwise speedo would read wrong in low range
|
|
|
Kstrader
New User
| Posts: 8
| Joined: 06/07
Posted: 07/12/07
02:52 PM
|
|
thank you for the adive. i didnt stop working after i did the break lines. i think it had that problem when i bought it was couple days ago and did the front brake lines first off and then noticed it didnt work. but thank you for the adive.
|
|
Posted: 07/17/07
03:54 PM
|
|
Did you check and see if the cable was in tact?
Long Travel 4 Wheel Drive - The Best of Both Worlds!
Questions? Comments? Concerns? PM Me!
|